- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
175Q56H25 100
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H25 100
$1,450.00
Out of stock
Out of stock
| Input Keyway (C Face): | 3/16x3/32 | Motor Frame Size: | 56C |
|---|---|---|---|
| Reducer Style: | Standard | Thrust Rating - output shaft: | 1144 |
| Efficiency: | 80 | Input Bore (C Face): | 0.625 |
| Input Speed: | 1750 | Ratio: | 25:1 |
| Product Type: | Worm Speed Reducer | No. of Gear Reductions: | Single |
| Center Distance (in): | 1.75 | Input HP @ 1750 RPM: | 0.88 |
| Frame Size: | 56C | Service Factor: | 1 |
| Ratio Range: | 25:1 | Series Code: | Raider |
| Output Diameter (in): | 1.000 in | Gear Type: | Worm |
| Input Diameter (in): | 0.625 in | Input Style: | C-Face Quill |
| Mounting Style: | Shaft Mt | Output Shaft Direction: | L or R |
| Output Shaft: | Hollow Bore | Housing Material: | Cast Iron |
| Output Torque Rating (in-lb): | 644 in-lbs @1750 input RPM in/lbs | Overhung Load Rating (Output Shaft(lb)): | 1, 200 lb |
| UPC: | 6, 62289E+11 | Weight: | 25.00 LB |
Related products
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
You haven't viewed at any of the products yet.