- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
175Q140L15
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q140L15
$1,100.86
Out of stock
Out of stock
| Input Bore (C Face): | 0.875 | Shaft Seal Material: | Nitrile |
|---|---|---|---|
| Thrust Rating - output shaft: | 1253 | Input Keyway (C Face): | 3/16 X 3/32 |
| Efficiency: | 80 | Reducer Style: | Standard |
| Input Speed: | 1750 | Motor Frame Size: | 140TC |
| Ratio: | 15:1 | Mounting Style: | No Base |
| Input Diameter (in): | 0.875 in | Reducer: | Worm - Right Angle |
| No. of Gear Reductions: | Single | Center Distance (in): | 1.75 |
| Model Code: | 175Q | Product Type: | Worm Speed Reducer |
| Output Key: | 3/16 X 1.38 | Input RPM: | 1, 750 |
| Frame Size: | 140TC | Input Style: | C-Face Quill |
| Output RPM: | 116.6 | Output Diameter (in): | 0.875 in |
| Series Code: | Raider | Output Shaft Assembly Code: | L |
| Ratio Range: | 15:01 | Assembly: | Q-L |
| Gear Type: | Worm | Input HP @ 1750 RPM: | 1.14 |
| Service Factor: | 1 | Output Shaft Direction: | Left |
| Overhung Load Rating (Output Shaft(lb)): | 740 lb | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 571 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| UPC: | 6, 62288E+11 | Weight: | 24.00 LB |
Related products
6GWBPF1 159
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 159
6GWBPF1 31
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 31
Recently viewed
You haven't viewed at any of the products yet.