- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
175Q140H5 100
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q140H5 100
Out of stock
| Motor Frame Size: | 140TC | Efficiency: | 80 |
|---|---|---|---|
| Input Bore (C Face): | 0.875 | Reducer Style: | Standard |
| Ratio: | 5:1 | Thrust Rating - output shaft: | 793 |
| Input Keyway (C Face): | 3/16x3/32 | Input Speed: | 1750 |
| Manufacturer Reducer Size: | 175 | Maximum Input HP: | 2.43 hp @ 1750 rpm |
| Service Factor: | 1 | Mounting Style: | Shaft Mt |
| Center Distance (in): | 1.75 | Product Type: | Worm Speed Reducer |
| Frame Size: | 140TC | Input Diameter (in): | 0.875 in |
| Gear Type: | Worm | Input HP @ 1750 RPM: | 2.43 |
| Input Style: | C-Face Quill | Output Diameter (in): | 1.000 in |
| No. of Gear Reductions: | Single | Ratio Range: | 5:01 |
| Series Code: | Raider | Output Shaft Direction: | L or R |
| Overhung Load Rating (Output Shaft(lb)): | 1, 200 lb | Output Shaft: | Hollow Bore |
| Housing Material: | Cast Iron | Output Torque Rating (in-lb): | 436 in-lbs @1750 input RPM in/lbs |
| UPC: | 6, 62288E+11 | Weight: | 25.00 LB |
Related products
262Q140H30 115
$2,146.21More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H30 115
Recently viewed
You haven't viewed at any of the products yet.