- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
154ULR20
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 154ULR20
$938.76
Out of stock
Out of stock
| Shaft Seal Material: | Nitrile | Key Length: | 1.38 |
|---|---|---|---|
| Efficiency: | 80 | Ratio: | 20:1 |
| Thrust Rating - output shaft: | 1241 | Input Speed: | 1750 |
| Reducer Style: | Standard | Key Sq.: | 0.1875 |
| Mounting Style: | No Base | Model Code: | 154U |
| Reducer: | Worm - Right Angle | Ratio Range: | 20:1 |
| Input Keyway: | 3/16 X 0.94 in | Gear Type: | Worm |
| No. of Gear Reductions: | Single | Output Shaft Orientation: | LR |
| Input Diameter (in): | 0.625 in | Product Type: | Worm Speed Reducer |
| Input HP @ 1750 RPM: | 0.64 | Center Distance (in): | 1.54 |
| Assembly: | U-LR | Input Style: | Solid Shaft |
| Input RPM: | 1, 75 | Series Code: | Raider |
| Output Diameter (in): | 0.750 in | Output Key: | 3/16 X 1.25 |
| Output RPM: | 87.5 | Output Shaft Assembly Code: | D |
| Service Factor: | 1 | Output Shaft Direction: | Double |
| Output Torque Rating (in-lb): | 518 in-lbs @1750 input RPM in/lbs | Overhung Load Rating (Output Shaft(lb)): | 388 lb |
| Output Shaft: | Solid Shaft | Housing Material: | Cast Iron |
| UPC: | 6, 62288E+11 | Weight: | 18.00 LB |
Related products
262Q140H10 115
$2,176.15More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H10 115
6GWBPF1 57
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 57
Recently viewed
You haven't viewed at any of the products yet.