- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
154UL60
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 154UL60
Out of stock
| Key Length: | 1.38 | Ratio: | 60:1 |
|---|---|---|---|
| Efficiency: | 80 | Thrust Rating - output shaft: | 1399 |
| Input Torque: | 14.08 in-Lbs @1750 input rpm, 1 HP | Key Sq.: | 0.1875 |
| Shaft Seal Material: | Nitrile | Reducer Style: | Standard |
| Input Speed: | 1750 | Input Style: | Solid Shaft |
| Series Code: | Raider | Output Key: | 3/16 X 1.25 |
| No. of Gear Reductions: | Single | Model Code: | 154U |
| Service Factor: | 1 | Gear Type: | Worm |
| Input Keyway: | 3/16 X 0.94 in | Assembly: | U-L |
| Ratio Range: | 60:1 | Product Type: | Worm Speed Reducer |
| Input RPM: | 1, 75 | Input HP @ 1750 RPM: | 0.28 |
| Output RPM: | 29.1 | Output Shaft Assembly Code: | L |
| Reducer: | Worm - Right Angle | Input Diameter (in): | 0.625 in |
| Center Distance (in): | 1.54 | Output Diameter (in): | 0.750 in |
| Output Shaft Direction: | Left | Overhung Load Rating (Output Shaft(lb)): | 388 lb |
| Output Shaft: | Solid Shaft | Housing Material: | Cast Iron |
| Output Torque Rating (in-lb): | 399 in/lbs | UPC: | 6, 62289E+11 |
| Weight: | 18.00 LB |
Related products
262Q140H30 115
$2,146.21More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H30 115
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
6GWBPF1 57
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 57
Recently viewed
You haven't viewed at any of the products yet.