- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
154UL50
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 154UL50
Out of stock
| Input Speed: | 1750 | Shaft Seal Material: | Nitrile |
|---|---|---|---|
| Ratio: | 50:1 | Thrust Rating - output shaft: | 1399 |
| Key Length: | 1.38 | Key Sq.: | 0.1875 |
| Reducer Style: | Standard | Efficiency: | 80 |
| Input Style: | Solid Shaft | Center Distance (in): | 1.54 |
| Reducer: | Worm - Right Angle | Input Keyway: | 3/16 X 0.94 in |
| Product Type: | Worm Speed Reducer | Output RPM: | 35 |
| Series Code: | Raider | Ratio Range: | 50:1 |
| Output Diameter (in): | 0.750 in | No. of Gear Reductions: | Single |
| Input RPM: | 1, 750 | Output Key: | 3/16 X 1.25 |
| Service Factor: | 1 | Assembly: | U-L |
| Output Shaft Assembly Code: | L | Input HP @ 1750 RPM: | 0.31 |
| Gear Type: | Worm | Input Diameter (in): | 0.625 in |
| Model Code: | 154U | Output Shaft Direction: | Left |
| Overhung Load Rating (Output Shaft(lb)): | 388 lb | Output Torque Rating (in-lb): | 494 in-lbs @1750 input RPM in/lbs |
| Housing Material: | Cast Iron | Output Shaft: | Solid Shaft |
| UPC: | 6, 62288E+11 | Weight: | 18.00 LB |
Related products
237Q56LR30
$1,254.86More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56LR30
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
You haven't viewed at any of the products yet.