- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
154UL40
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 154UL40
$938.76
Out of stock
Out of stock
| Efficiency: | 80 | Thrust Rating - output shaft: | 1399 |
|---|---|---|---|
| Key Sq.: | 0.1875 | Ratio: | 40:1 |
| Input Speed: | 1750 | Key Length: | 1.38 |
| Shaft Seal Material: | Nitrile | Reducer Style: | Standard |
| Manufacturer Reducer Size: | 154 | Maximum Input HP: | 0.56 hp @ 1750 rpm |
| Product Type: | Worm Speed Reducer | Input HP @ 1750 RPM: | 0.38 |
| Gear Type: | Worm | Assembly: | U-L |
| Input Diameter (in): | 0.625 in | Input Style: | Solid Shaft |
| Mounting Style: | No Base | Output Shaft Assembly Code: | L |
| Reducer: | Worm - Right Angle | Output RPM: | 43.7 |
| Service Factor: | 1 | Ratio Range: | 40:01:00 |
| Series Code: | Raider | No. of Gear Reductions: | Single |
| Input Keyway: | 3/16 X 0.94 in | Output Key: | 3/16 X 1.25 |
| Model Code: | 154U | Output Diameter (in): | 0.750 in |
| Input RPM: | 1, 75 | Center Distance (in): | 1.54 |
| Output Shaft Direction: | Left | Housing Material: | Cast Iron |
| Output Shaft: | Solid Shaft | Overhung Load Rating (Output Shaft(lb)): | 388 lb |
| Output Torque Rating (in-lb): | 520 in-lbs @1750 input RPM in/lbs | UPC: | 6, 62288E+11 |
| Weight: | 18.00 LB |
Related products
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
6GWPF1 17.6
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 17.6
Recently viewed
You haven't viewed at any of the products yet.