- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
154Q56R60
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 154Q56R60
$1,058.11
Out of stock
Out of stock
| Input Bore (C Face): | 0.625 | Input Speed: | 1750 |
|---|---|---|---|
| Input Keyway (C Face): | 3/16 X 3/32 | Shaft Seal Material: | Nitrile |
| Thrust Rating - output shaft: | 1399 | Motor Frame Size: | 56C |
| Ratio: | 60:1 | Reducer Style: | Standard |
| Efficiency: | 80 | Output Shaft Assembly Code: | R |
| Service Factor: | 1 | Series Code: | Raider |
| Output Key: | 3/16 X 1.25 | Ratio Range: | 60:1 |
| Output RPM: | 29.1 | Frame Size: | 56C |
| Reducer: | Worm - Right Angle | No. of Gear Reductions: | Single |
| Center Distance (in): | 1.54 | Gear Type: | Worm |
| Output Diameter (in): | 0.750 in | Model Code: | 154Q |
| Assembly: | Q-R | Input RPM: | 1, 75 |
| Input HP @ 1750 RPM: | 0.28 | Input Style: | C-Face Quill |
| Product Type: | Worm Speed Reducer | Output Shaft Direction: | Right |
| Housing Material: | Cast Iron | Output Shaft: | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)): | 388 lb | Output Torque Rating (in-lb): | 462 in-lbs @1750 input RPM in/lbs |
| UPC: | 6, 62289E+11 | Weight: | 21.00 LB |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
Recently viewed
You haven't viewed at any of the products yet.