- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
154Q56R25
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 154Q56R25
$1,058.11
Out of stock
Out of stock
| Motor Frame Size: | 56C | Input Bore (C Face): | 0.625 |
|---|---|---|---|
| Thrust Rating - output shaft: | 1144 | Efficiency: | 80 |
| Input Speed: | 1750 | Input Keyway (C Face): | 3/16 X 1.38 |
| Ratio: | 25:1 | Reducer Style: | Standard |
| Manufacturer Reducer Size: | 154 | Maximum Input HP: | 0.752 hp @ 1750 rpm |
| Frame Size: | 56C | Ratio Range: | 25:1 |
| Output Diameter (in): | 0.750 in | No. of Gear Reductions: | Single |
| Input Style: | C-Face Quill | Center Distance (in): | 1.54 |
| Input Diameter (in): | 0.625 in | Series Code: | Raider |
| Gear Type: | Worm | Product Type: | Worm Speed Reducer |
| Service Factor: | 1 | Mounting Style: | No Base |
| Input HP @ 1750 RPM: | 0.752 | Output Shaft Direction: | Right |
| Output Torque Rating (in-lb): | 503 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| Output Shaft: | Shaft | Overhung Load Rating (Output Shaft(lb)): | 860 lb |
| UPC: | 6, 62289E+11 | Weight: | 21.00 LB |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
6GWBPF1 36.6
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 36.6
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
Out of stock
