- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
133Q56R30
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56R30
$888.88
Out of stock
Out of stock
| Reducer Style: | Standard | Thrust Rating - output shaft: | 1399 |
|---|---|---|---|
| Shaft Seal Material: | Nitrile | Efficiency: | 80 |
| Input Bore (C Face): | 0.625 | Input Keyway (C Face): | 3/16 X 3/32 |
| Ratio: | 30:1 | Motor Frame Size: | 56C |
| Input Speed: | 1750 | Output RPM: | 58.3 |
| Reducer: | Worm - Right Angle | Input Diameter (in): | 0.625 in |
| Output Diameter (in): | 0.625 in | Frame Size: | 56C |
| Input RPM: | 1, 750 | Input Style: | C-Face Quill |
| Input HP @ 1750 RPM: | 0.32 | Product Type: | Worm Speed Reducer |
| Mounting Style: | No Base | Service Factor: | 1 |
| Model Code: | 133Q | Center Distance (in): | 1.33 |
| Gear Type: | Worm | No. of Gear Reductions: | Single |
| Ratio Range: | 30:01:00 | Series Code: | Raider |
| Output Key: | 3/16 X 1.31 | Assembly: | Q-R |
| Output Shaft Assembly Code: | R | Output Shaft Direction: | Right |
| Housing Material: | Cast Iron | Output Shaft: | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)): | 458 lb | Output Torque Rating (in-lb): | 314 in-lbs @1750 input RPM in/lbs |
| UPC: | 6, 62288E+11 | Weight: | 17.00 LB |
Related products
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
Recently viewed
You haven't viewed at any of the products yet.