- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
133Q56H40 010
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H40 010
$1,412.59
Out of stock
Out of stock
| Ratio: | 40:1 | Input Speed: | 1750 |
|---|---|---|---|
| Efficiency: | 80 | Reducer Style: | Standard |
| Input Keyway (C Face): | 3/16 x 3/32 | Motor Frame Size: | 56C |
| Thrust Rating - output shaft: | 1144 | Input Bore (C Face): | 0.625 |
| Frame Size: | 56C | Product Type: | Worm Speed Reducer |
| No. of Gear Reductions: | Single | Gear Type: | Worm |
| Mounting Style: | Shaft Mt | Ratio Range: | 40:1 |
| Input HP @ 1750 RPM: | 0.329 | Input Diameter (in): | 0.625 in |
| Series Code: | Raider | Service Factor: | 1 |
| Output Diameter (in): | 0.625 in | Input Style: | C-Face Quill |
| Center Distance (in): | 1.33 | Output Shaft Direction: | L or R |
| Output Torque Rating (in-lb): | 322 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| Output Shaft: | Hollow Bore | Overhung Load Rating (Output Shaft(lb)): | 700 lb |
| UPC: | 6, 62288E+11 | Weight: | 14.32 LB |
| Packaged Length: | 11.1 Inches | Packaged Width: | 10.4 Inches |
| Packaged Height: | 11.8 Inches |
Related products
262Q140H10 115
$2,176.15More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H10 115
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
Recently viewed
You haven't viewed at any of the products yet.